Updated Feb 13/20

DJI Ronin-2, Ronin-MX, Ronin-M & Accessories

DJI Ronin 2 - call for pricing and availablity
* For DSLRs / Cinema Cameras
* 30 Pound Payload Capacity
* Enhanced SmoothTrack Algorithm and GPS
* Upright, Underslung, and Briefcase Modes
* Easy Underslung/Upright Transitions
* 2-Axis Mode for Use with Steadicam
* Retractable Feet/Self-Supporting Design
* Camera Control For Select Cameras
* 2.4 / 5.8 GHz Switchable Remote
* Up to 0.6 Mile Control Range

Ronin-2 Accessories

CineCrew ARRI ALEXA Mini 16-inch 8 Pin Right Angle LEMO to DJI Ronin 2 Power Cable - $269 - in stock
Allows the DJI Ronin 2 to power ARRI Alexa Mini Cameras.

CineCrew RED DSMC2 14-inch 6 Pin Right Angle LEMO to DJI Ronin 2 Power Cable - $269 - in stock
Allows the DJI Ronin 2 to power RED DSMC2 Cameras.

SHAPE V-MOUNT BATTERY DOCK CLAMP FOR 25 MM GIMBAL HANDLEBAR VDM25 - $130 - special order
Demo on Sale $109
Mount V-Mount Battery to Gimbal
Fits on 24.9 to 25.5 mm Rods
Quick Release Design
Cold Shoe Accessory Mount
0.5″ Long 1/4″-20 Captive Screw
Aluminum Construction

DJI Ronin-M - $1199 - special order
* Supports Cameras up to 8 Pounds
* Precision of Control: ±0.02°
* Transmitter for Remote Pan/Tilt Control
* Tool-Less Balance Adjustment System
* Assistant Software for iOS and Windows
* Bluetooth Wireless Interface for Setup
* Silent Mode For Quiet Operation
* USB and PowerTap Power Outputs

DJI Ronin MX - $1869 - special order
A tweaked version of the popular DJI Ronin M. Max load capacity is 10 lbs.
* Supports Cameras up to 10 Pounds
* Compatible with Matrice 600
* Robust Magnesium Construction
* Radio Controller for Second Operator
* iOS / Android App-Based Control
* SmoothTrack Technology
* Upright, Underslung, and Briefcase Modes
* Supports Mounting of Second DJI Battery
* USB and D-Tap Power Outputs

Accessories for Ronin-M Stabilizers

SmallRig Monitor Mount for Ronin M - $55 - more in soon
(1860) Has 1/4-20 and 3/8 mounting holes, so you can attach your own arm. Compatible with Ronin M/MX or Movi.

Ronin-M Universal Camera Mounting Plate - $115 - in stock

DJI Ronin Thumb Controller for Ronin-M - $229 - special order
The wireless thumb controller is perfectly compatible and ready to be used with the DJI Ronin-M. An additional external receiver is required for use with the Ronin, while the Ronin-M’s built-in receiver allows use without any additional parts.

Ronin-M Tilt Bar Extension Rods - $26 - special order
Specifically for the Ronin M, these rods extend the vertical adjustment arms by 30mm. This helps with cameras over 195mm in height.

Ronin-M Camera Screws - $15 - special order
2 x 1/4-20 + 2 x 3/8.

DJI Ronin-M 4S 1580mAh Battery - $129 - special order
NOTE: Requires DJI Ronin-M 4S charger. Not compatible with original DJI 57 watt charger.
The DJI Intelligent Battery was specially designed for the Ronin-M. It has a capacity of 1580mAh, a voltage of 14.4V, and a variety of power management functions. When fully charged, it has a maximum run-time of three hours.

DJI Ronin-M 4S Battery Charger - $49 - special order

DJI Grip for Ronin-M/Ronin-MX - $309 - special order
Enables Alternatives Shooting Styles. Easy Transition Between Operators. Breaks Down for Transport. Carry Case Included.

Carrying Cases

Nanuk 940 With Custom Foam Insert for Ronin-M - $249 - special order
A Nanuk 940 hard case with a custom laser cut foam interior, specifically designed for the DJI Ronin-M. Made in Canada. Lifetime warranty. Interior dimensions: L20.0" x W14.0" x H8.0"/L508mm x W356mm x H203mm
Exterior dimensions: L21.7" x W16.9" x H8.5"/L557mm x W429mm x H216mm

DJI Ronin-M Suitcase - $289 - special order
Size: Approx. 51.5cm long x 38.6cm wide x 23.4cm high