Updated Mar 3/2014
Cheeseplates for 15mm Rods
Scroll down to see all available items.
Wooden Camera Battery Slide - $209 - in stock
Rod clamp is required to attach to 15mm rails.
Battery Slide is an adjustable mounting system for v-mount, QRC gold mount, and RED/Blueshape style battery plates. Rows of 1/4-20 threaded and pass through holes allow attachment of Rod Clamps, cheeseplates, and more. Apply firm pressure to tilt the plate in place. Loosen the thumbscrew to slide the plate up and down and also tilt. Great for adjusting counterbalance and for transitioning from studio to handheld mode.
(2) 1/4-20 x 1/4 Socket Cap Screws
(4) M3 x 12mm Pan Head Screws
(4) #4x40 x 5/8 Pan Head Screws
Wooden Camera Rod Clamp - $109 - in stock
Rod Clamp (15mm LW) can attach to existing 15mm rods to provide 1/4-20 mounting points. It can also be turned over and bolted to cheeseplates, cages, battery plates, and more. Extremely versatile, compact, and lightweight.
(2) 1/4-20 x 1/4" screws
(2) 1/4-20 x 3/4" screws
Weight: 0.2 lbs
Dimensions: 4.4 x 1 x .6 in
Zacuto Z-ZWP Zwiss Plate - $149 - in stock
The Zacuto Zwiss Plate is Zacuto’s multi-purpose mounting plate. It allows you to mount articulating arms, rods, batteries, converter boxes and various other camera accessories to your support system. Unlike other cheese plates, the Zwiss Plate has two sets of industry standard 15mm rod holes spaced 60mm apart. This allows vertical mounting onto standard 15mm rods. A second set of rods can be mounted through the top of the plate if you wish to extend your rig at another level. The red levers enable you to securely mount the plate onto your rods. The Zwiss Plate is also designed to work with our new Wireless Plate for mounting multiple wireless receivers. You can use the Zwiss Plate to mount a variety of accessories or brick style batteries and battery plates. The Zwiss Plate works with both 3-Stud and V-Mount style batteries. The battery plate and battery mounted on the Zwiss Plate can double as counterbalance. You can still add more counterbalance by adding our Z-Lite weights to the back of the rig along with the Zwiss Plate. Our Zamerican quick release arms mount directly into the 15mm holes of the plate and are perfect for mounting lights, monitors and audio devices. It now comes with the (4) screws needed to mount the AJA Ki Pro Mini. With plenty of ¼ 20” and 3/8 16” holes, your mounting options are limitless.
Shape Battery Cheese Plate
CP33IDX Model (V-Mount) - $329 - in stock
CP33ANTON (Gold Mount) - $329 - special order - usually takes under 1 week
This combines a Shape Cheese Plate with either an IDX V-Mount battery plate or Anton Bauer Gold Mount plate. One side has the battery plate, the other has several 1/4" and 3/8" threaded holes to attach various accessories. Cheese plate is made out of anodized aluminum. Battery plate has D-Tap/Power Tap out, so you can power accessories that take D-Tap power.
Genus Cheese Plate GCPS - $299 - special order
The Genus Cheese plate is a multi-purpose plate which enables you to mount a variety of accessories to your camera support system. The plate is covered with a series of 1/4 " and 3/8" holes to make it easier to mount your accessories where you need them with industry standard 15mm rod support. The plate also has holes on it to accommodate a wide range of battery plates and AJA Ki Pro Mini. A unique feature of thus cheese plate is that it can be mounted vertically or horizontally on 15mm rods at 60mm spacing. The mounting of accessories on this plate also adds in the counter- balancing of camera rigs.
Find follow focus here
Find rails and baseplates here
Find matte boxes here