Updated Feb 26/21
Tilta Handles and Accessories for Blackmagic Pocket 4K/6K
Tilta Pocket 4K/6K Quick Release Top Handle -
$109 - in stock
(TA-QRTH-G) This quick release top handle easily and securely attaches to the
top of both of the half and full camera cages. It provides several 1/4”-20 and
3/8”-16 mounting points as well as a cold shoe mounting point for your accessories.
(Grey)
Tilta Rubber Side Handle - $120 - in stock
(TA-SH-MHC3) This side handle slides onto the base of the half
and full Tilta camera cages to provide a comfortable, ergonomic
way to hold and operate your camera. (Grey)
Tilta Side Focus Handle Type I (F970 Battery) - $275
- in stock
(TA-SFH1-97G) This side handle slides onto the base of
the half and full Tiltaing camera cages. A battery port on
the bottom of the handle allows you to use a Sony F970 battery
to power the Nucleus Nano motor via the 8V Micro-USB power
output. A 12V DC output is also integrated into the handle.
A built-in finger wheel allows you to control the Nucleus Nano
motor through a wired connection and a run/stop button allows you
to control the record start/stop function of your camera through
an optional Nucleus-Nano R/S cable (for cameras that support this
function). The handle also has an integrated Samsung T5 SSD card
holder. (Grey)
**Note: 12V Micro DC Power Cable not included
**Note: The handle communicates with the Nano motor through a wired connection and does not function wirelessly.
Tilta Side Focus Handle Type I (F570 Battery) - $269 - in stock
(TA-SFH4-57-G)
This side handle slides onto the base of the half and full Tilta camera cages. A battery port on the bottom of the handle allows you to use a Sony F570 battery to power the Nucleus Nano motor via the 8V Micro-USB power output. A 12V DC output is also integrated into the handle.
A built-in finger wheel allows you to control the Nucleus Nano motor through a wired connection and a run/stop button allows you to control the record start/stop function of your camera through an optional Nucleus-Nano R/S cable (for cameras that support this function).
**Note: 12V Micro DC Power Cable not included
**Note: The handle communicates with the Nano motor through a wired connection and does not function wirelessly
Tilta Side Power Handle Type I (F970 Battery) - $200
- in stock
(TA-SH1-97-G). This side handle slides onto the base of the half and
full Tilta camera cages. A battery port on the bottom of the
handle allows you to use a Sony F970 battery to power the Nucleus
Nano motor via the 8V Micro-USB power output. A 12V DC output
is also integrated into the handle. The handle also has an integrated
Samsung T5 SSD card holder. (Grey)
Tilta Power Side Handle - $165 - in stock
(TA-SH4-57-G)
* Allows Sony F570 battery to power Nucleus Nano motor via 8V Micro-USB power
output
* Half / Full Tilta camera cage Compatibility
* 12 V DC Output
* Aluminum / Steel Material Construction
Tilta Pocket 4K/6K DC Power Cable for Side Handle -
$21 - in stock
(TCB-BMPC-DCM12) This cable allows you to power the Pocket
4K/6K camera from Tilta Side Handles that have a battery
option. Connects to the power port on the side handle, and
goes into the power port on the side of the Pocket 4K/6K
handle. 16"/40cm long.
Tilta Pocket 4K/6K 15mm LWS Baseplate - Grey -
$165 - in stock
( TA-BSP-15-G) This 15mm LWS baseplate easily slides onto the base of the half
and full camera cages. It provides 15mm LWS rod holders to allow you attach rod-based
accessories and is compatible with Tilta-standard dovetails. Grey finish.
Tilta Pocket 4K/6K Partial Sunhood - $40 - in stock
(
TA-T01-HSH) The partial sunhood attaches directly to the back
of the Tilta BMPCC 4K half and full camera cages to provide
sunshade to your camera’s LCD screen when shooting in bright
exterior environments. NOTE: not a stand-alone item, can
only work with the Tilta cages due to the proprietary fastener.
Tilta 90 Degree USB-C Cable (20cm) - $22 - more in soon
(CB-USBC-20) This 20cm USB-C cable was specifically designed
to integrate with the Tilta BMPCC 4K/6K camera cage. It’s
designed with a 90-degree connection on each end so that the cable
perfectly hugs the side of the cage.
Tilta Pocket 4K/6K HDMI 90 Degree Adapter - $18 - in
stock
(
TA-T01-HAD-90) This HDMI adapter was designed specifically
for the Tilta BMPCC 4K/6K camera cage. It allows for an easy way to attach
an HDMI cable to your camera while ensuring that the cable
tightly hugs the side of the cage.
Tilta Pocket 4K/6K SSD Drive Holder for Samsung T5 -
Grey - $27 - in stock
(TA-SSDH-T5-G) The SSD drive holder attaches directly to the Tilta half and full
camera cages and provides a way to attach a Samsung T5 SSD drive to your camera
setup to allow you to record footage onto a separate SSD card. Grey finish.
Tilta Pocket 4K/6K SSD Drive Holder for Samsung T5 -
Tactical Finish - $27 - special order
(TA-SSDH-T5)
Tilta TA-T01-LAS-G - $18 - in stock
Lens Adapter Support Bracket. This bracket can attach to the
front of the BMPCC 4K/6K half and full camera cages to provide
support for the various lens adapters that can be used with
the camera.