Updated Sept 12/26

Baby Plates, Baby Pins, Accessories

Avenger F800 - Reg $35 Display Model on Sale $25 - call to check
Baby plate with 3" light stud. Small holes in the plate allow the plate to be screwed to a surface. Usually used to mount lights onto wood beams or walls. Also used to place lights low on the floor. Made in Italy.

Avenger F805 - Reg $37 Display Model on Sale $29
Baby Plate with 6" light stud. Small holes in the plate allow the plate to be screwed to a surface. Usually used to mount lights onto wood beams or walls. Also used to place lights low on the floor. Made in Italy.

Avenger MP EYE Coupler C4462-1 - Reg $60 Sale $45 - limited stock
Avenger MP Clamps are used for attaching lights to trusses. They clamp on pipes from 42 to 52mm in diameter. To assist with rigging, the clamp mouth can be limited to transform the coupler in a hook. Maximum Load: 1100 lbs (500kg), so they can take anything. Has a welded 5/8" baby pin. Made in Italy.

Fehr Brothers Safety Chain 30”
(SAFE-2) - $16 – sold out
The SAFE-2 is a 7x7, 1/8 X 30 Inch, Black, Galvanized, Powder-Coated Lighting Restraint Cable with 5/16 Inch Spring Hook on one end and a secure loop on the other. Lighting Safety Cables can be attached to fixtures to guard against them falling when the primary method of attachment fails. These steel cable assemblies are secured around a pipe or truss of a stage lighting fixture then clipped on itself using the attached spring clip. Safety cables are mandatory in most stage rigging applications as they afford an extra measure of security and protection from possible support structure failure.

Find Spigots and Light Stud Adapters here