Updated Sept 8/26
Monitor Mounts
ToteVision MB-1 Monitor Desk Stand - Reg $39 - Display Model on Sale $2
The Tote Vision MB-1 is a simple desk stand for the smaller
field monitors/recorders. This mounting solution uses the
universal 1/4-20 screw to attach to the monitor. The stand
offers a small amount of tilt adjustment. The stand has a footprint
measuring 3.9 x 3.5 x 1.5 (WxHxD) inches.
Upgrade Innovations Single Hinge Monitor
Mount - $219 - limited stock
(11820) The MMS12 Friction-Loc VESA Monitor Mount supports
broadcast quality monitors up to 45 lb/20kg. Chosen by professionals
to mount VESA standard monitors to 5/8” (16mm)
male spigots or baby pins. Single hinge to tilt up and down.
Supports VESA 75 and 100. Captive screws so you don't lose
them! Very high quality. Made in Canada.
Upgrade Innovations Single Monitor Mount with L/P - $310 - call to check
(11830) The MMS12 VESA Monitor Mount to 5/8″ Spigot – Friction-Loc – L/P supports broadcast & production quality monitors up to 45 lb/20kg. The Friction-Loc hinge design features our industry strong friction disks, providing a strong hold and convenience to set your monitor in almost any viewing position. The system is best for fine adjustments and gives you 360 degree position lock down. The L/P VESA mounting plate model is studio friendly. Quickly swing your monitor from the landscape to portrait position or level the monitor when on an uneven surface. This mounting option comes with built in adjustable friction and a locking knob to hold the monitor in place. Ideal for your green screen, stills and social media work, as you can make use of the full monitor display screen. The model comes with our industry favourite captive thumbscrews and will fit FDMI Standard VESA 75/100mm patterns.
Upgrade Innovations Twin Hinge Monitor Mount -
$289 - limited stock
(11585) The MMS11 Twin Hinge Friction-Loc VESA Monitor Mount
supports broadcast quality monitors up to 40 lb/18kg. The
two-point adjustment design, allows for unlimited viewing
positions, making it a preferred mounting option. Chosen
by professionals to mount VESA standard
monitors to 5/8” (16mm) male spigots or baby pins. Twin hinge
to tilt up and down and all around. Supports VESA 75 and
100. Captive screws so you don't lose them! Very high quality.
Made in Canada.
Upgrade Innovations Twin Monitor Mount with L/P - $359 - limited stock
(11588)
The MMS11 VESA Monitor Mount to 5/8″ Spigot – Twin Friction-Loc – L/P supports broadcast & production quality monitors up to 40 lb/18kg. Chosen by professionals & rental houses to mount VESA standard monitors to 5/8” (16mm) baby pins. The two-point adjustment design, allows for unlimited viewing positions, making it a preferred mounting option. The Friction-Loc hinge design features our industry strong friction disks, providing a strong hold and convenience to set your monitor in almost any viewing position. The system is best for fine adjustments and gives you 360 degree position lock down. The L/P VESA mounting plate model is studio friendly. Quickly swing your monitor from the landscape to portrait position or level the monitor when on an uneven surface. This mounting option comes with built in adjustable friction and a locking knob to hold the monitor in place. Ideal for your green screen, stills and social media work, as you can make use of the full monitor display screen. The model comes with our industry favourite captive thumbscrews and will fit FDMI Standard VESA 75/100mm patterns. Mount wireless receivers, transmitters, antennas or other accessories directly to our Monitor Mounts using the 1/4-20, 3/8-16 or M5 non-twist threaded holes. See drop down menu below for further information regarding our non-twist mounting accessories.
Upgrade Innovations Single Hinge Monitor
Mount w/QR - $350 - special order
(12120) The same design as the standard model, except adds
a Quick Release Plate. Plate attaches to the back of your monitor,
and slides onto the receiver on the mount itself. The MMS12
Friction-Loc VESA Monitor Mount supports broadcast quality
monitors up to 45 lb/20kg.
Mounts to 5/8” (16mm) male spigots or
baby pins. Single hinge to tilt up and down. Supports VESA
75 and 100. Very high
quality. Made in Canada.
Upgrade Innovations Spud - $25 - limited stock
(12565) The MMS 5/8 Non-Twist Baby Pin can be mounted via the
M5 thread found on all of our latest Monitor Mounts. Mounts
via 5/32 or 4mm Hex Key. Once mounted to Monitor Mount, the
top of the 5/8 Baby Pin also provides a 3/8 tapped thread for
mounting accessories. This accessory works great with our Spigot
Adapters or for using existing gear already in your kit.
Upgrade Innovations Baby Pin Pan Lock Clamp - $55 - limited stock
(14400) The Baby Pin Pan Lock Clamp is designed to clamp onto any standard 5/8 (16mm) baby pin and integrates with all Upgrade Innovations spigot adapters. The pan lock clamp limits the mount from panning on the baby pin. The front mounting surface of the Baby Pin Pan Lock Clamp is outfitted with an Arri 3/8″ Pin-Loc pattern for rigging non-twist accessories, if the setup allows mounting access for accessories (for example, focus stations with SmallHD 13″ monitors).
Selens Monitor Quick Release Mount (VESA 100) - $55 - limited stock