Updated Jan 23/26

RED Camera Komodo Accessories, Cables Etc.

Scroll down to see all available options.

SmallRig Professional Kit for KOMODO - Reg $270 Demo on Sale $149
(3209)

• Formfitting Magnesium-Aluminum Cage
• Articulating Monitor Mount
• Right-Side Wooden NATO Handgrip
• Tempered Glass Screen Protector
• NATO Rails, ARRI-Style Rosette
• Multiple 1/4"-20 Accessory Threads

Vaxis ATOM 600 KV Wireless Video System TX/RX Kit - Display Model on Sale $779

• Wireless TX for RED KOMODO Camera
• Wireless ATOM 500 SDI Receiver
• Transmits Wireless Video up to 600'
• V-Mount, Supports up to 1080p60 Video
• TX SDI Input, SDI/HDMI Outputs
• TX Mounts onto Dual-Battery Plate
• TX Passes Through V-Mount Battery Power
• RX Powers Using USB or L-Series Plate
• Horizontal/Vertical TX Mounting Options
• Low <80 ms Latency, OLED Display

GDU Derringer Handle (Right) + Tommy Rib Combo - Demo on Sale $239
FOR RED KOMODO.

• Compact, Low-Profile Handgrip
• Aluminum Attachment and Thumb Rest
• Walnut Wood Grip
• The handgrip attaches to the Timmy Rib and can be mounted at three different heights, so you can find the most comfortable mounting position.

SmallRig Monitor Holder for RED Komodo - Reg $69 Display Model on Sale $39
(3045)

• For 5 or 7" Onboard Monitor up to 3.3 lb
• Mounts with 1/4"-20 Screws onto Cage
• Swivels 360° / Tilts 170°
• Protective Rubber Padding on Top
• Locks in Any Position with Allen Wrench
• Durable Aluminum Construction

Tilta Komodo PL Mount Support Black - Reg $11 Sale $5 - limited stock
(TA-T08-LAS-B) Attaches to the bottom front of the Tilta cage for the RED Komodo to provide support for a PL mount lens adapter. Includes crews for securing the adapter.

Tilta Komodo Top Handle (TA-QRTH3-B) Black - $109 Sale $69 - limited stock

• 1/4"-20 and Anti-Twist 3/8"-16 Threads
• 1 x Shoe Mount, 1 x 15mm Rod Support
• Spring-Loaded Locking Thumbscrew
• Aluminum Alloy and Stainless Steel
• Works with Tilta Komodo Cage

Tilta Komodo Screen Protection Kit - $13 - limited stock
This kit provides adhesive protective covering for your Red Komodo/Komodo-X camera. Simply peel off the adhesive and attach to the designated areas of the camera body.

Cables

RED Komodo EXT to Timecode Cable 3’ - $149 - limited stock
(790-0674)
The RED® EXT-to-Timecode Cable 3’ provides a Timecode connection via 9-pin EXT connector.
• Length measured from end-to-end of cable including connectors.

SmallHD RED CTRL 4-pin to SmallHD 5-pin USB Cable - 18" - $159 - limited stock
(CBL-CNTRL-RED-CTRL-18)

SmallHD RED CTRL 4-pin to SmallHD 5-pin USB Cable - 36" - $159 - limited stock
(CBL-CNTRL-RED-CTRL-36)

Access RED® KOMODO™ or DSMC2™ Camera Control on SmallHD monitors when using a breakout box with a 4-pin CTRL port. Software installation not included. RED® Control Cable Only. Also works with Smart 7 Monitors (Indie7/702Touch/Cine7) requires LEMO USB Adapter, sold separately. (ACC-C7T-USB-ADP) Camera Control License for RED® KOMODO™ sold separately.

The RED PTap-to-Power Cable allows you to power your KOMODO camera from a P-Tap power source. Length measured from end-to-end of cable including connectors.

RED P-Tap to Power Cable for Komodo
3' (790-0675) - Reg $140 Sale $119 - limited stock
6' (790-0676 ) - Reg $159 Sale $129 - limited stock

Wooden Camera Battery Slide - Reg $620 Sale $449 - limited stock
(280300) Battery Slide Pro V-Mount (RED® KOMODO) attaches to the camera-left, BP-9 battery slot and powers the camera using a right angle LEMO compatible connector. Thumbscrew can be loosened to tilt and slide the plate as needed.

Three D-Taps on the plate provide battery voltage for accessories and power is monitored for over-current. If more than 5.8A are used by accessories, a digital fuse will trip and the red LED will illuminate but the camera will remain powered. Reset button can be pressed once to restart accessory power.

DC Input on camera-right side can be used for hot-swapping between block battery and on-board battery. While the AC adapter that comes with the KOMODO can be used, please note that it may not be powerful enough to sustain the camera and accessory draw.

Specifications:
Weight: 264 g (0.59 lbs)
Dimensions: 127 x 114.3 x 44.45 mm (5 x 4.5 x 1.75 in

Wooden Camera B-Box 280500 - Reg $585 Demo on Sale $449
B-Box (RED® KOMODO™) attaches to the camera-right BP-9 battery slot and provides a breakout for the camera’s EXT connector. Battery Slide Pro V-Mount or Gold Mount for RED KOMODO can be used simultaneously and custom right-angle LEMO compatible connector allows for neat cable run. Canon BP-9 batteries could also be attached in camera-left slot while B-Box is used.
Available ports include:

- R/S (3pin Fischer)

• simple run/stop for Handgrip Trigger Box, Simple 3pin Fischer Trigger Cable, etc.
• no power available
• devices like ARRI WCU-4 may require CTRL port interface with cable K2.0015758
• pin1:GND, pin2:N/C, pin3:GPI

- Timecode (5pin LEMO)

• standard wiring for timecode in/out
• pin1:GND, pin2:LTC-IN, pin3:N/C, pin4:N/C, pin5:LTC-OUT

- CTRL (4pin LEMO)

• standard wiring for RED CTRL
• pin1:GND, pin2:UART-RX, pin3:GPO, pin4:UART-TX

- 5V (USB)

• 5V available at 500mA maximum
• power may need to be enabled in camera menu

- Genlock (BNC)

• standard wiring for genlock
• center:signal, shell:GND

Find Komodo Accesories on Special Order here

Find RED Komodo compatible CFast 2.0 Cards here

Find Komodo-x Cages here

Find RED accessories on sale here